繁體中文English
網站地圖
Home Products Maxmold® Washer
  PDF Print E-mail
Maxmold® Spacer ( Washer)

Maxmold® rubber spacer mainly comes in silicone, NBR,FKM, and other rubber as main products. The silicone rubber has outstanding temperature tolerance. It can be used between -70℃~+260℃ with excellent elasticity, O3 tolerance, weathering tolerance. It is also suitable for sealing use in hot machines. It’s non-toxic and can be used for heat insulation, electricity insulation, and medical uses. It is also water proof, flame retardant, high temperature tolerant, conductible, friction tolerant, and oil tolerant. It is widely used in mechanical, electrical, drinking water industries. Maxmold® silicone spacer is certified by EU environment standards and EU foodgrade standard.

Maxmold® also manufactures FFKM perfluoroelastomers spacer with low compress capacity and high temperature tolerance. They retain the chemical tolerance with corrosive resistant at the same time without causing the the sealing life cycle shortening. There are a series of material with standard sizes available in our company. You are welcome to contact us.

Maxmold® also manufactures FFKM perfluoroelastomers spacer with low compress capacity and high temperature tolerance. They retain the chemical tolerance with corrosive resistant at the same time without causing the sealing life cycle shortening. Maxmold® FFKM perfluoroelastomers is your best choice in many special places. KATON, Maxmold, 橡膠, 橡膠墊片, 歐盟環保標準, FFKM, perfluoroelastomers抵抗化學襲擊, 密封, 耐化學性, 氟橡膠

Last Updated on Wednesday, 13 November 2013 14:13
 

KATON® and Maxmold® O-Rings

KATON® and Maxmold® manufacture and supply o-rings of any material with the outer diameter range from 1.5 mm (0.06”) to 2 meters (6.5 foots), line diameter from 0.8mm(0.03”) to 12mm(0.47“). We take orders from big and small amount. ...More.

Perfluoroelastomer (FFKM)

ASTM had designated it as type A perfluorinated polymethylene-type rubber (usually called PFC). Currently, there are more than 30 PFC formulas in
KATON® and Maxmold® FFKM...More

Encapsulated O-Ring

An encapsulated o-ring is a two-component circular seal with a round cross section. The elastomers impart memory to the seal and are encapsulated in a Teflon jacket. The encapsulation protects the elastomer from hostile environments....more