KATON® FKM FK5 Series is a new medium viscosity peroxide curable fluoroelastomer with a unique structure, patented by Maxmold Polymer, that affords excellent resistance to aggressive oils, amine containing fluids, bases, and steam.
KATON® FKM FK5 Series exhibits superior resistance to a wide variety of chemicals (such as aggressive oils, amine containing fluids, bases and steam), coupled with excel-lent processability.
KATON® FKM FK5 Series can be cross-linked using organic peroxides in conjunction with a co-agent.
KATON® FKM FK5 Series is excellent in：
• ATF fluids
• Steam
• Fluids containing amine additives
• High PH packages
• Good mechanical properties
• Lack of mold fouling
• Excellent mold release
KATON® FKM FK5 Series can be used for compression, in-jection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance.
KATON® FKM FK5 Series can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting.
| Cost Performance Ratio | ||||||
| FK1 | FK2 | FK3 | FK5 | FVQM | FEPM | FFKM |
| ★ (Low Price) |
★★ (General Price) |
★★★★ (High Cost) |
★★★ (Median Price) |
★★★★ (High Cost) |
★★★★ (High Cost) |
★★★★★ (Very High Cost) |
| Model Table | |||||
| Model | Color | Shore A | Material | Cross-Linking | Remarks |
| SF80WH-010 | White | 80 | FK5 | Peroxide | Optimized five-component polymer resistant to alkali, transport without wheel marks |
